BRILMIDE^®  Acrylamide Solution

Our acrylamide solution is made using a bio-catalytic process and is a key monomer for
the manufacture of polyacrylamides and other speciality polymers.

Product: BRILMIDE^® Acrylamide Solution
Cas No.: 79-06-1
Chemical formula: C3H5NO

BRILMIDE^® ACRYLAMIDE SOLUTION

Parameter	Specifications		Method
	BRILMIDE®	BRILMIDE® 40
Purity (wt %)	49 – 51	39 – 41	Refractometer
Appearance	Clear, transparent liquid		Visual check
Color (APHA)	<30		Visual check
pH	6.0 – 7.0		pH meter
Iron (ppm)	<0.1ppm		AAS

PACKING:	250 kgs drum – 20,000 kgs per 20'fcl 1050 kgs / 850 kgs ibc – 18,900 / 20,600 kgs per 20'fcl Tankers / iso-tankers
Shelflife:	6 months when stored under prescribed Conditions away from direct sunlight
Applications:	Polymers for enhanced oil recovery, Polymers for shale gas extraction, Polymers for shale strengthening, Polymers for flocculation in waste water, Binders and retention aids in paper, Water proofing chemicals, Cement additives, Coating and paint emulsions, Textile sizing chemicals and binders, Binders in adhesives and many more
MSDS – View / download

Advantages of using liquid acrylamide over powder acrylamide

1. Cost and logistic advantages
Acrylamide powder is produced by drying acrylamide solution containing anywhere between 50 - 70% of water. This involves high energy cost, which finally gets passed on to the consumer. Furthermore, acrylamide is normally used as a solution, which means the powder has to be once again dissolved with water.

In case of acrylamide powder:
Acrylamide liquid ---> Dried to form powder ---> Packaging ---> Transportation to port ---> Shipping in containers ---> Clearance ---> Customs duties ---> Transportation to factory ---> Dissolved in water ---> Acrylamide liquid prepared ---> Use in final reaction

In case of BRILMIDE^® acrylamide solution:
Acrylamide liquid ---> Packaging ---> Transportation to factory ---> Use in final reaction

Using BRILMIDE^® acrylamide solution, one can eliminate the need for imports and can save not only money but also valuable labor and time.

2. Better purity
By avoiding the drying process entirely, the probability of contamination is reduced. Furthermore, the product comes as a solution in highly pure demineralised water, helping protect the final reaction from unwanted impurities and process fluctuations. High purity acrylamide also leads to a more uniform polymerization and the ability to produce higher molecular weight polymers.

3. Convenient handling
BRILMIDE^® acrylamide solution is safer and easier to handling as compared to powder where the risk of dusting is high.

4. Improved processability
The homogeneous nature of BRILMIDE^® acrylamide solution leads to better reaction control, giving consistently better quality end products. Handling of BRILMIDE^® acrylamide solution also helps reduce loss of material due to spillage and reduces weighing errors. Furthermore, acrylamide in solution form can be stored, pumped, and processed more easily than the powder form.